Edimax EW-7228APn Manuale Utente Scaricare il pdf (Pagina 14)

Chapter II: System and Network Setup

2-1 Installing the access point to your Network

Please follow the following instruction to build the network connection

between your new wireless access point and your computers, network

devices:

1. Connect the access point to ADSL modem, router, or switch/hub in

your network through the LAN port of the access point by Ethernet

cable.

2. Connect the A/C power adapter to the wall socket, and then connect it

to the „Power‟ socket of the access point.

3. Please check all LEDs on the front panel. „PWR‟ LED should be

steadily on, LAN LEDs should be on if the access point is correctly

connected to the ADSL modem, router or switch/hub. If PWD LED is

not on, or any LED you expected is not on, please recheck the cabling,

or jump to ‘4-2 Troubleshooting’ for possible reasons and solution.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 81 82

Nessun commento

Edimax EW-7228APn Manuale Utente Pagina 14